ViewSonic SC-T46 - Updating Firmware from the Management Computer

Conguring Client Settings
Conguring System Settings
43
43
4.2.6 Updating Firmware from the Management Computer
Update Firmware allows client users to update rmware from its management computer.
NOTE
• Ensure that your SC-T46 has been added into a managed group under ViewSonic
Device Manager installed on a remote computer, and that you have imported client
rmware les into ViewSonic Device Manager. These are prerequisites of this feature.
• For more information on rmware update and ViewSonic Device Manager, please
refer to the User Manual for ViewSonic Device Manager.
To update rmware from the management computer, please do the following:
1. On ViewSonic Client Setup, click System > Firmware Update.
2. Under the Firmware Update section, click Check Firmware.
3. Upon completion, a window appears notifying you that the Firmware list has been loaded.
4. Click Ye s to continue.