ViewSonic SC-T46 - Collecting Event Logs and Capturing Related Screens

Conguring Client Settings
Conguring System Settings
53
53
4.2.10 Collecting Event Logs and Capturing Related Screens
The Error Report feature allows you to collect event logs and capture related screens for error reporting.
Collecting Event Logs
To collect event logs of your SC-T46, please do the following:
1. Plug a USB ash drive into your SC-T46.
NOTE
• This USB ash drive will be used for storing the event logs of your SC-T46.
• Ensure that you have enabled the access and automount of USB storage devices.
For detailed instructions, please refer to section “4.4.3 Conguring Settings for USB
Storage Devices” on page 70.
NOTE
• Please note that les saved on the local desktop will be deleted after restart.
2. On ViewSonic Client Setup, click System > Error Report.