ViewSonic SC-T46 - Available Settings at a Glance

Conguring Client Settings
Conguring System Settings
37
37
4.2.2 Available Settings at a Glance
Tab Setting Icon Description Section Page
System
Time Zone
Click to congure the time zone and time server
for your SC-T46.
4.2.3 38
Password
Click to congure the access privileges of
ViewSonic Client Setup for SC-T46 users.
Click to congure settings for remote assistance.
4.2.4
4.2.5
39
41
Firmware Update
Click to update rmware through the network. This
feature is applicable to the client only when the
client is managed by the remote ViewSonic Device
Manager console.
4.2.6 43
Appliance Mode
Click to enable/disable the Appliance mode to
allow/disallow the automatic RDP / ICA / View
sessions. In Appliance mode, the client starts up
with the desired RDP / ICA / View session and
shuts down when the user logs out.
4.2.7 45
Quick Connection
Click to congure the Quick Connection mode. 4.2.8 49
Terminal
Click to enable/disable the execution of the
text-based (command-line) functions.
4.2.9 52
Error Report
Click to collect error log and launch the screen
capturing program for error reporting.
4.2.10 53
Certicate
Manager
Click to import or manage certicates for
remote computers.
4.2.11 55
NOTE
• ViewSonic Device Manager is a remote and mass client management console,
helping you remotely manage a large number of endpoint devices in a desktop
virtualization infrastructure. For more information about ViewSonic Device Manager,
please refer to the User’s Manual for ViewSonic Device Manager.