ViewSonic SC-T46 - Configuring the Access Privileges and Passwords of Viewsonic Client Setup

Conguring Client Settings
Conguring System Settings
39
39
4.2.4 Conguring the Access Privileges and Passwords of ViewSonic Client Setup
You can congure the access privileges of ViewSonic Client Setup for SC-T46 users by the Password setting.
NOTE
• All SC-T46 users are allowed to access ViewSonic Client Setup by factory default.
You can make changes as desired using this setting.
Setting Access Privileges and Password Only for Administrators
To set access privileges and password only for administrators, please do the following:
1. On ViewSonic Client Setup, click System > Password.
2. Under the Administrator section, click to check Active Admin Authorization.
3. The access privileges for administrators are granted and a window appears for you to set the password.
4. Type in the desired password, and then click OK to conrm.
5. Click Save to save all the changes.