ViewSonic SC-T46 - Page 51

Conguring Client Settings
Conguring System Settings
40
40
Setting Access Privileges and Password Also for Standard Users
To set access privileges and password also for standard users, please do the following:
1. On ViewSonic Client Setup, click System > Password.
2. Under the User section, click to check Use Password.
NOTE
• The User section appears only when Active Admin Authorization is checked.
3. The access privileges for standard users are granted and a window appears for you to set the password.
4. Type in the desired password, and then click OK to conrm.
5. Click Save to save all the changes.