ViewSonic SC-T46 - Establishing and Stopping a VPN Connection

Conguring Client Settings
Conguring Network Settings
83
83
4.5.5 Establishing and Stopping a VPN connection
The VPN setting enables you to establish/stop a virtual private network connection for your SC-T46.
NOTE
• The VPN setting also allows you to congure and manage virtual private network
settings. For instructions on how to congure and manage virtual private network
settings, please refer to section “4.5.6 Conguring Virtual Private Network Settings”
on page 87.
Adding a Virtual Private Network
To add a virtual private network, please do the following:
1. On ViewSonic Client Setup, click Network > VPN to open the Virtual Private Network list.
NOTE
• If you haven’t created any entry, the Virtual Private Network list will be empty.
2. Click Add on the top of the Virtual Private Network list.