ViewSonic SC-T46 - Page 95

Conguring Client Settings
Conguring Network Settings
84
84
3. On General tab, click the drop-down menu to select the desired VPN type. Three types are available: PPTP,
L2TP, and Cisco AnyConnect.
NOTE
• The setting items will vary with the selected VPN type.
4. Type in or click drop-down menus to provide information about conguration and authentication.
NOTE
• Consult your network administrator for required information on conguration and
authentication.
5. On Options tab, congure the DNS-related settings if needed.
6. Click Save to add the virtual private network.
Establishing a Virtual Private Network Connection
To establish a virtual private network connection for your SC-T46, please do the following:
1. On ViewSonic Client Setup, click Network > VPN to open the Virtual Private Network list.