ViewSonic SC-T46 - Manually Mount and Eject Attached USB Storage Devices

Conguring Client Settings
Conguring External Device Settings
71
71
Settings for USB Storage Devices
Item Description
Enable USB Storage
Tick/Untick this checkbox to allow/disallow the access of USB storage devices.
NOTE: To use the locally attached USB storage devices in an RDP / ICA / View
session, the mapping of local USB storage devices must be enabled
in this session’s RDP / ICA / View connection settings. For detailed
instructions and more related settings, please refer to sections:
“4.6.5 Conguring Advanced RDP Connection Settings” on page 114
“4.6.8 Conguring Advanced ICA Connection Settings” on page 148
“4.6.11 Conguring Advanced View Connection Settings” on page 176
Enable Automount
Tick/Untick this checkbox to enable/disable the automount of
USB storage devices.
NOTE: If this setting is disabled, users need to manually mount the attached
USB storage devices. For detailed instructions, please refer to section
“4.4.4 Manually Mount and Eject Attached USB Storage Devices” on page
71.
3. Click Save to save your change.
NOTE
• For your changes to take eect, you need to restart your system.
4.4.4 Manually Mount and Eject Attached USB Storage Devices
To mount/eject an attached USB storage device, please do the following:
NOTE
• If Enable Automount is checked (see section “4.4.3 Conguring Settings for USB
Storage Devices” on page 70), then an attached USB storage device will be
mounted automatically.
1. Right click the desktop icon of the attached USB storage device.
2. A popup menu appears.
3. Click to select Mount Volume/Eject Volume to mount\eject the attached USB storage device.