ViewSonic SC-T46 - Page 136

Conguring Client Settings
Conguring Service Access Settings
125
125
Options Sub-tab
Window Settings
Item Description
Color Depth
Click the drop-down menu to select the desired color depth for a Remote
Desktop session. Five options are available: Automatic, 15 Bit, 16 Bit, 24 Bit,
and 32 Bit.
NOTE: If RemoteFX is enabled, then no matter which color depth you choose
here, 32 bit per pixel will be applied.
NOTE: The Automatic option uses the setting dened by the host server.
NOTE: You can congure the upper limit of the color depth for a Remote Desktop
session on the host server. In this case, no matter which color depth you
choose here, the value cannot exceed the dened limit.
Cursor Auto-hide
Click the drop-down menu to enable/disable the auto-hiding of the mouse cursor
or pointer on inactivity in Remote Desktop sessions.
Use RemoteFX
Click the drop-down menu to disable/enable RemoteFX.
NOTE: Windows
®
RemoteFX™ is a technology that offers a rich user experience
over a network for remote desktop users.
NOTE: To enable the RemoteFX feature for Remote Desktop sessions on your
SC-T46 thin client, you still need to congure the host server. For detailed
instructions on how to enable RemoteFX on a host server, please visit
Microsoft Support website at support.microsoft.com.
Use Bulk Compression
Click to enable/disable the bulk compression for the data trafc between the
server and client.
Connection Settings
Item Description
USB Storage Mapping
Click the drop-down menu to enable/disable USB storage mapping.
When Enable is selected, users can access the local USB storage devices, such
as a USB ash drive and memory card reader, in a Remote Desktop session.
NOTE: ViewSonic Client Setup also allows you to enable or disable the use of
locally attached USB storage devices. You need to enable locally attached
USB storage devices rst in order to use them in a Remote Desktop
session. The default is enabled.
NOTE: To congure the use of USB storage devices, please refer to section
“4.4.3 Conguring Settings for USB Storage Devices” on page 70.
Printer Mapping
Click the drop-down menu to enable/disable printer mapping.
When Enable is selected, users can access a local or network printer in a
Remote Desktop session.
NOTE: You need to add a local or network printer for your SC-T46 rst, and then
enable this feature here to use that printer in a Remote Desktop session.
NOTE: For detailed instructions on how to add a local or network printer for your
SC-T46, please refer to section “4.4.6 Adding a Local Printer” on page
73 or “4.4.7 Adding a Network Printer” on page 76.