ViewSonic SC-T46 - Page 162

Conguring Client Settings
Conguring Service Access Settings
151
151
Options Sub-tab
Device Mapping
Item Description
Mapping Local USB Storage
Click the drop-down menu to enable/disable the mapping of the local USB drive(s)
and to select access type in a Citrix ICA session. Three options are available: No, Read
Only, and Read Write. If Read Only or Read Write is selected, the locally attached USB
drive(s) will become available in launched Citrix ICA sessions.
NOTE: You need to enable local USB storage drive(s) as well. See section “4.4.3
Conguring Settings for USB Storage Devices” on page 70 for details.
Mapping Local Serial Ports
Click the drop-down menu to enable/disable the mapping of the local serial device(s)
in a Citrix ICA session. If Ye s is selected, the locally attached serial device(s) will become
available in launched Citrix ICA sessions.
NOTE: This setting item is not applicable to your SC-T46. However, if you use a
serial-based barcode scanner, and attach it to your SC-T46 with a serial-
to-USB adapter, you need to enable this setting in order to use the local
barcode scanner in a virtual desktop.
Mapping Local Printers
Click the drop-down menu to enable/disable the mapping of the local printer(s) in a
Citrix ICA session. If Ye s is selected, the locally attached printer(s) will become available
in launched Citrix ICA sessions.
NOTE: To enable locally attached printer(s), please refer to section “4.4.6
Adding a Local Printer” on page 73 for detailed instructions.
Connection Settings
Item Description
Rendering Type
Click the drop-down menu to select resources rendering on the endpoint or the
server. Two options are available: Server Rendering and Client Rendering.
NOTE: The Client Rendering option may not be available on your system.
HDX RealTime WebCam
This item is available only when Client Rendering is selected.
When Yes is selected, a locally attached webcam can be used in an ICA session.