ViewSonic SC-T46 - Page 180

Conguring Client Settings
Conguring Service Access Settings
169
169
Server Address
Type in the IP address / URL / FQDN of the XenApp server.
NOTE: Server Connection only supports connections to XenApp servers.
Username Type in the user/account name used for authentication.
Password Type in the password of the user account used for authentication.
Domain Type in the domain of the server.
Server Name Type in the name of the server.
Common Settings
Item Description
Autostart When Startup
Select whether to open a Citrix ICA session automatically or not when your
SC-T46 is started up (Autostart mode).
NOTE: There are three similar but different modes for your SC-T46 and only one
mode will take effect if all are enabled. Three modes and the order of
priority are listed as follows:
No. Mode Description
1 Appliance
The client will start up directly with the desired
Citrix ICA session and turn off after existing the
session.
2 Autostart
The client will start up directly with the desired
Citrix ICA session and perform the congured
action after existing the session.
Available actions include:
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
3 Quick Connection
The default. The client will enter ViewSonic Quick
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.
On Application Exit
Select what to do when a Citrix ICA session is ended. Four options are available:
Do Nothing, Restart Application, Reboot, and Shutdown.
Option Description
Do Nothing Returns to the Local Linux desktop.
Restart Application Opens an ICA session again.
Reboot Restarts your thin client.
Shutdown Turns off your thin client.