ViewSonic SC-T46 - Appendices

Conguring Client Settings
Conguring Service Access Settings
171
171
Enable Automatic Reconnect
Check/Uncheck to enable/disable automatic reconnecting after an ICA session
was interrupted.
NOTE: Automatic reconnecting (Auto Client Reconnect) may not work for a
XenDesktop ICA session. This is a known issue. For more details, please
visit Citrix websites at support.citrix.com or www.citrix.com.
Number of Retries Click the drop-down menu to select the number of retries, ranging from 1 to 10.
Delay between Retries
Click the drop-down menu to select the delay time between retries, ranging from
5 to 60 seconds.
Enable Audio Check/Uncheck to enable/disable sound in an ICA session.
Audio Quality
Click the drop-down menu to choose the desired sound quality in an ICA session.
Three options are available: High Quality, Medium Quality, and Low Quality.
Option Description
High Quality
Allows endpoint devices to play a sound
le at its native data transfer rate. This
is recommended for connections where
bandwidth is plentiful and sound quality is
important.
Medium Quality
Compresses any sounds sent to endpoint
devices to a maximum of 64Kbps, resulting
in a moderate decrease in the quality
of the sound. This option is suitable for
speeches and recommended for most LAN-
based connections.
Low Quality
Compresses any sounds sent to endpoint
devices to a maximum of 16Kbps, resulting
in a signicant decrease in the quality
of the sound. This option is suitable for
low-bandwidth connections, allowing
reasonable audio performance during a
low-speed connection.
Enable Audio Input Check/Uncheck to enable/disable audio input in an ICA session.
Windows Key Combination
Click the drop-down menu to select where to apply Windows Key Combinations.
Three options are available: On the local computer, On the remote server,
and In full screen mode only.
Option Description
On the local computer Applies to the local desktop only.
On the remote server Applies to the virtual desktop only.
In full screen mode only
Applies to the virtual desktop only when the
desktop is running in the full-screen mode.