ViewSonic SC-T46 - Configuring User Interface Settings

Conguring Client Settings
Conguring System Settings
48
48
Disabling the Appliance Mode
To disable the Appliance mode, please do the following:
1. Under the Appliance mode, exit the Full Screen mode of the RDP / ICA session, or release the keyboard and
mouse from the View session (virtual desktop):
• To exit the Full Screen mode of the RDP session, press Ctrl + Alt + Enter, and then minimize
the session window.
• To exit the Full Screen mode of the ICA session, press Ctrl + F2, and then Alt + F9.
• To release the keyboard and mouse from the View session (virtual desktop), press Ctrl + Alt.
NOTE
• Please note that the View session (virtual desktop) will remain on the background
after you release the keyboard and mouse from the View session (virtual desktop).
2. Click Ctrl + Shift + Del to launch ViewSonic Client Setup.
NOTE
• You cannot access the Taskbar of the client operating system (ViewSonic Linux)
under the Appliance mode.
3. On ViewSonic Client Setup, click System > Appliance Mode.
4. Click to uncheck Enable Appliance Mode, and then click Save to apply the change.
5. Return to the current RDP / ICA / View session:
• To return to the current RDP / ICA session, use Alt + Tab (press and hold Alt, and then press Tab to switch
between dierent items) to select and restore the current RDP / ICA session.
• To return to the current View session, click any place of the View session (virtual desktop)
on the background.
6. Log o from the current RDP / ICA / View session.
7. The client will shut down then. Restart your client manually.