ViewSonic SC-T46 - Page 6

v
ViewSonic SC-T46 thin clients that earn the ENERGY STAR prevent
greenhouse gas emissions by meeting strict energy efciency guidelines
set by the U.S. Environmental Protection Agency and the U.S. Department
of Energy.
NOTE
• Display Sleep Mode. Within 10 minutes of user inactivity, the display will enter
the Display Sleep mode with a blank screen and reduced power consumption
by the factory default settings. The display returns to the Display Normal mode
upon sensing a request from a user such as moving the mouse or pressing a
key.
• To adjust settings for the Display Sleep mode, please refer to section “4.3.7
Conguring Screensaver Settings”.
• System Sleep Mode. ViewSonic SC-T46 supports the System/Client Sleep
mode. You can enter this mode manually by choosing Suspend after clicking
Power Off button.
• Wake On LAN. ViewSonic SC-T46 supports Wake On LAN by default, using
ViewSonic Device Manager to wake up the thin client remotely through the
network. To congure this setting, please refer to section “4.5.4 Enabling or
Disabling Wake on LAN”.
NOTE
• The default power management settings have been selected for compliance
with ENERGY STAR that are recommended by the ENERGY STAR program
for optimal energy savings.