ViewSonic SC-T46 - Configuring External Device Settings

Conguring Client Settings
Conguring System Settings
58
58
Importing certicates from the management console through the network
To import certicates from the management console through the network, please do the following:
NOTE
• Before proceeding, ensure that (1) your thin client has been added into a managed
group in the management console, that is, ViewSonic Device Manager, and that (2)
you have imported certicates into the management console.
1. On ViewSonic Client Setup, click System > Certicate Manager.
2. Click Add on the top of the Certicate list.
3. In the From Management Console section, click Import to start importing all certicates available in the
management console.
4. On completion, the certicates are shown in the Certicate list.