The record set 1 contains the 4byte of the record set 0 and addition-
ally 12byte module specific diagnostic data. The diagnostic bytes
have the following assignment:
Byte Bit 7...0
0 ... 3
Content record set 0
Ä
‘Record set 0 Diagnostic
incoming
’
on page 135
4
n Bit 6 ... 0: Channel type (here 70h)
– 70h: Digital input
– 71h: Analog input
– 72h: Digital output
– 73h: Analog output
– 74h: Analog input/output
n Bit 7: More channel types present
– 0: no
– 1: yes
5 Number of diagnostic bits per channel (here 08h)
6 Number of channels of a module (here 08h)
7
n Bit 0: Error in channel group 0 (I+0.0 ... I+0.3)
n Bit 1: Error in channel group 1 (I+0.4 ... I+0.7)
n Bit 2: Error in channel group 2 (I+1.0 ... I+1.1)
n Bit 3: reserved
n Bit 4: Error in channel group 4 (Frequency meter 0)
n Bit 5: Error in channel group 5 (Frequency meter 1)
n Bit 6: reserved
n Bit 7: reserved
8 Diagnostic interrupt due to "process interrupt lost" at...
n Bit 0: ... input I+0.0
n Bit 1: 0 (fix)
n Bit 2: ... input I+0.1
n Bit 3: 0 (fix)
n Bit 4: ... input I+0.2
n Bit 5: 0 (fix)
n Bit 6: ... input I+0.3
n Bit 7: 0 (fix)
9 Diagnostic interrupt due to "process interrupt lost" at...
n Bit 0: ... input I+0.4
n Bit 1: 0 (fix)
n Bit 2: ... input I+0.5
n Bit 3: 0 (fix)
n Bit 4: ... input I+0.6
n Bit 5: 0 (fix)
n Bit 6: ... input I+0.7
n Bit 7: 0 (fix)
Diagnostic Record set 1
at frequency measure-
ment
VIPA System 300SDeployment I/O periphery
Diagnostic and interrupt > Diagnostic interrupt
HB140 | CPU-SC | 312-5BE13 | GB | 15-50 138
To Next Page
Loading...