6 Deployment I/O periphery
6.1 Overview
At the 312-5BE13 the connectors for digital in-/output and technolog-
ical functions are integrated to a 2tier casing.
The project engineering takes place in the Siemens SIMATIC man-
ager as CPU 312C from Siemens (6ES7 312-5BE03-0AB0 V2.6).
Here the CPU 312-5BE13 is parameterized by the "Properties" dialog
of the CPU 312C. For parameterization of the digital I/O periphery
and the technological functions the corresponding submodule of the
CPU 312C may be used.
The integrated I/Os of the 312-5BE13 may be used for technological
functions or as standard I/Os. Technological functions and standard I/
Os may be used simultaneously with appropriate hardware. Read
access to inputs used by technological functions is possible. Write
access to used outputs is not possible.
Up to 2 channels may be parameterized as technological function.
The parameterization of the appropriate channel is made in the hard-
ware configurator by the count submodule of the CPU 312C. There
are the following technological functions:
n Continuous count
n Single count
n Periodic count
n Frequency measurement
n Pulse width modulation (PWM)
The controlling of the corresponding counter mode happens by
means of the SFB COUNT (SFB 47) of the user program.
Hardware
Project engineering
I/O periphery
Technological functions
VIPA System 300SDeployment I/O periphery
Overview
HB140 | CPU-SC | 312-5BE13 | GB | 15-50 90
To Next Page
Loading...