Setting the Automatic Pedal mode (A.P. MODE parameter)
It is possible to select the Automatic Pedal function operating mode, activated with the [AUTO PEDAL] or [AUTO
PED] thumb piston.
To do this, in the KEYBOARDS menu set the A.P. MODE field as follow:
Automatic Pedal function operating mode.
Settings:
• Ped. A.Piano: activate the Pedal Automatic Piano mode. This function automatically
adjusts the sound composition of the pedalboard, according to the manual currently played.
• Pd/Kb Mono: activate the Mono Pedal function which allows you to play the Pedalboard
voices on all the manuals. When doing this the pedalboard is deactivated and the stops
become monophonic, with priority on the lowest note.
• Pd/I Mono: Pedalboard voices are played on Manual I. When doing this the pedalboard is
deactivated and the stops become monophonic, with priority on the lowest note.
• Pd/II Mono: Pedalboard voices are played on Manual II. When doing this the pedalboard
is deactivated and the stops become monophonic, with priority on the lowest note.
To Next Page
Loading...
