Viscount Cantorum Duo Plus - Backup, Restore and Factory Reset (Backup;Restore menu); Snapshot Management

EN - 31
Reference Manual
Backup, restore and factory reset of organ configuration
(Backup/Restore menu)
BACKUP, RESTORE and FACTORY RESET of ORGAN
CONFIGURATION (BACKUP/RESTORE menu)
The BACKUP/RESTORE menu contains functions to backup (save as .ALL file)
the entire organ configurations (Pipe Sets, combinations, settings) in a USB flash drive,
reload it (or parts of it) into the internal memory and reset to the factory-set state of the
entire organ settings. Created backup files are also called “Snapshot”.
To access to this menu, in the main video page,
1. press the [MENU/ENTER] button,
2. place the cursor on the BACKUP/RESTORE (2nd page) field and press
[MENU/ENTER].
The BACKUP/RESTORE menu contains the following settings:
Function
Description
Save Snapshot
Save of the entire organ configuration (Pipe Sets, combinations, settings) in a USB flash drive.
Load Snapshot
Load the entire organ configuration or single sections (Pipe Sets, combinations, settings) from a
USB flash drive.
Factory Reset
Restore of the entire organ configuration (Pipe Sets, combinations, settings) to the factory-set state.
Restore Def.Setting
Restore the instruments settings to the factory-set state.
What a Snapshot contains
Below is the complete list of what a Snapshot contains:
Section
Parameter
Display page
Explanation
page
Pipe Sets
All the pamaters contained in all the Pipe Sets
available in the instrument.
10
Pipe Sets
Stop list.
Available in the “Physis Plus The
Editor” application
Combinations
All the combinations of all the Combination Sets
available in the instrument.
12
Combinations
Combinations parameters
SETUP / COMBINATIONS
26
Settings
External Volume, External Reverb parameters
LEVELS
14
Settings
A.P. Mode
SETUP / KEYBOARDS
23
Settings
ENC Config
SETUP / CONTROLS
25
Settings
Swellboxes Steps
SETUP / CONTROLS
25
Settings
Link Master Volume Pot. To
SETUP / CONTROLS
25
Settings
Orchestra Couplers
SETUP / CONTROLS
25
Settings
Audio parameters
(except Reverberation parameters)
SETUP / AUDIO
27
Settings
MIDI parameters
SETUP / MIDI
29
Settings
LCD Contrast
UTILITY
34
Settings
Auto Mainpage
UTILITY
34
Settings
Sub Loud
Available in the “Physis Plus The
Editor” application
Settings
External outputs parameters
Available in the “Physis Plus The
Editor” application
NOTES
-
Once the USB flash drive is inserted please wait some seconds before displaying the
BACKUP/RESTORE menu. If the instrument still does not detect the drive, showing “Warning: no USB
mem” on the bottom of the screen, press [EXIT] to leave the menu and then try again.
-
When connecting a new or just formatted USB flash drive to the organ, the system will automatically
create two directories in the drive: “v_settings” and “v_songs”. The system needs these two folders to
arrange files, and they must not be deleted or renamed, otherwise the saved files will be lost. The system
will save the organ configuration as .ALL file in the “v_settings” directory. Please pay attention not to
delete or rename this folder to avoid losing or making unusable the recordings.
- Always use USB flash drive formatted with FAT or FAT32 file system (no NTFS).