Viscount Cantorum Duo Plus - Combinations Settings (Setup; Combinations menu); Storing Combination Parameters

EN - 26
Reference Manual
Combinations settings (Setup / Combinations menu)
COMBINATIONS SETTINGS (SETUP / COMBINATIONS menu)
The COMBINATIONS menu contains all the settings relating to the combinations
available in the organ.
To access to this menu, in the main video page,
1. press the [MENU/ENTER] button,
2. place the cursor on the SETUP field and press [MENU/ENTER],
3. place the cursor on the COMBINATIONS field and press [MENU/ENTER].
The COMBINATIONS menu contains the following settings:
Parameter name
Description
Couplers in
Crescendo
Enable/disable of storing the status of couplers in the Crescendo.
Settings: Yes, No
Tremulant
parameters in
Combinations
Enable/disable of storing the tremulant parameters (see page 16) in the general and divisional
combinations.
Settings: No, Yes
ENC in
Combinations
Enable/disable of storing the status of [ENC] thumb piston in the general combinations.
Settings: No, Yes
ENC affected by
Cancel
Enable/disable to switch off [ENC] thumb piston by [C] thumb piston.
Settings: No, Yes
A.P. in
Combinations
Enable/disable of storing the status of [AUTO PED] thumb piston in the general combinations.
Settings: No, Yes
A.P. affected by
Cancel
Enable/disable to switch off [AUTO PED] thumb piston by [C] thumb piston.
Settings: No, Yes
Orchestra Params in
Combinations
Enable/disable of storing the configuration parameters of orchestral voices in the combinations.
Settings: No, Yes
NOTE
This setting affect the parameters that can be adjusted with the function described on page 21 and
not with the settings that are stored in the Pipe Sets.
TUTTI Mode
Selecting how [TUTTI] combination controls stops.
Settings:
• Gen. Combination: replaces its content.
• Layered: adds its content.