Restore the factory organ configuration (FACTORY RESET function)
To restore the entire organ configuration (Pipe Sets, combinations, settings) to the
factory conditions, follow this procedure:
1. in the main video page press the [MENU/ENTER] button,
2. select the BACKUP/RESTORE field,
3. select the FACTORY RESET field,
4. at the message “RESTORING TO FACTORY STATUS, PROCEED?” press
[MENU/ENTER] to confirm or [EXIT] to abort.
Restore the default settings (RESTORE DEF. SETTING function)
It is possible to restore only the Settings of the organ configuration to the factory
conditions (refer to the table in “What a Snapshot contains” to know in detail what
contains the Settings section). To do so, follow this procedure:
1. in the main video page press the [MENU/ENTER] button,
2. select the BACKUP/RESTORE field,
3. select the RESTORE DEF. SETTING field,
4. at the messages “REVERTING TO DEFAULT, PROCEED?” and
“RESTORING STOP LIST, PIPE SETS, COMBINATIONS AND SETTINGS,
ARE TOU SURE?” press [MENU/ENTER] to confirm or [EXIT] to abort.
To Next Page
Loading...
