Page 4 Vision Microsystems Incorporated
Percent Power Operation / Calibration
The percent power system provides both a full sweep color graphic
analog display and three place digital display. The full color range
marks provide you with a quick reference when making fast power
changes and the digital readout provides precise information. A
warning alert activates whenever the %HP redline is reached (as set
in ENGINE LIMITS menu). The display flashes until this condition
is corrected. To activate Percent Power mode, simply hold in until
you see the %HP icon appear. Note: calibration must be initially
performed before use.
Oil System Operation
Both oil pressure and oil temperature are displayed
continuously in two separate full sweep color
graphic and digital areas.
Oil Pressure
As oil pressure rises, the graph size increases
proportionately. The full color range marks let you see at a glance
how close to red line oil pressure you are. The graphic changes color
to match the range marks.
The digital display shows in 1 PSI increments to a maximum of 199.
This is very useful for monitoring typical engine oil pressure trends.
Because of the high accuracy and repeatability of this system, the oil
pressure can be closely monitored for unusual trends. For example, if
you are cruising in a stabilized condition, and the oil pressure starts
to decrease, and oil temperature is increasing, this may indicate an
impending oil system problem.
Oil Pressure Alert
A warning alert activates whenever the engines redline is reached (as
set in ENGINE LIMITS menu 50.4). The display will flash until this
condition is corrected.
Oil Temperature
To Next Page
Loading...
Need help?
General
