Visonic POWERMAX PRO Installer's Guide

D-302541 23
Note
For Control Panel that has
installer code
&
master
installer code
,
the following
functions are available only if
the MASTER INSTALLER
code is entered:
PSTN/GSM RCVR1
RCVR 1 ACCOUNT#
PSTN/GSM RCVR2
RCVR 2 ACCOUNT#
PSTN RPRT FORMAT
4/2 PLS RATE
REPORT EVENTS
RPRT CNFRM ALRM
SEND 2WV CODE
VOICE C.S.
RINGBACK TIME
PSTN RPRT RETRY
GSM RPRT RETRY
MAST. DL CODE
1: PSTN / GSM 4: PRIVATE REPORT3: C.S. REPORTING2: GPRS / BB
LINE PREFIX
DIAL METHOD GSM KEEP ALIVE
AREA CODE
disable
every 28 days
xxxx
(Enter prefix)
xxxx
(Enter tel. area code)
4.5.1(1) Par. 4.5.1(2) Par. 4.5.1(3) Par. 4.5.1(4)
tone (dtmf)
pulse
GPRS REPORT
GPRS APN
GPRS USERNAME
GPRS PASSWORD
disable
enable
disable
enable
disable
enable
GSM REPORT SMS REPORT
4.5.2(1)
Par. 4.5.2(2) Par. 4.5.2(3) Par. 4.5.2(4)
Par. 4.5.2(5) Par. 4.5.2(6)
(Enter GPRS
username)
xxxx...(up to 40 digits)
(Enter name of APN)
(Enter GPRS
password)
xxxx...(up to 30 digits)
xxxx...(up to 16 digits)
FORCE HOME NETW.
Par. 4.5.2(9)
ANTENNA SELECT
Par. 4.5.2(7)
SIM PIN CODE
(Enter SIM card
PIN code)
Par. 4.5.2(8)
xxxx...(up to 16 digits)
internal antenna
external antenna
Note
The currently saved options
are displayed with dark box
at the right side of the display.
To review the options,
repeatedly click or
until the desired option
is displayed, then click OK (a
dark box will be displayed at
the right side).
5. DEFINE COMM.
3. DEFINE ZONES
2. ENROLLING
1. NEW INSTL CODE
ENTER CODE
INSTALLER MODE
USER SETTING
[installer code]
<OK> TO EXIT
disable
enable
See detail A
disable report
all
all (-op/cl)
REPORT TO PRVT
4.5.4(1)
all (-alerts)
alarms
alerts
op/cl
VOICE REPORT SMS REPORT TEL#
1st private tel#
Par. 4.5.4(2a)
3rd private tel#
2nd private tel#
4th private tel#
Redial attempts
3 attempts
2 attempts
4 attempts
1 attempt
Voice<-->private
enable two-way
disable two-way
1st SMS tel#
Tel. acknowledge
single ack
all ack
2nd SMS tel#
3rd SMS tel#
4th SMS tel#
Par. 4.5.4(2) Par. 4.5.4(3)
Par. 4.5.4(2b) Par. 4.5.4(2c)
Par. 4.5.4(2d) Par. 4.5.4(2e) Par. 4.5.4(2f)
Par. 4.5.4(2g)
Par. 4.5.4(3a) Par. 4.5.4(3b)
Par. 4.5.4(3c)
Par. 4.5.4(3d)
SMS Tel. No. SMS Tel. No.
SMS Tel. No. SMS Tel. No.
Tel. No. Tel. No . Te l. No.
Tel. No.
WALK TEST
READY
(First display)
4. DEFINE PANEL
Par. 4.5.2(10)
LAN SETTINGS
ENABLE DHCP
PLEASE WAIT...
DHCP DISABLE
MANUAL IP
PLEASE WAIT
DHCP ENABLE
Par. 4.5.2(10a) Par. 4.5.2(10b)
IP address

xxx.(up to 12 digits
0 to 255)
(Enter IP address)
Subnet mask

xxx.(up to 12 digits
0 to 255)
(Enter subnet mask)
TRANS. PROTOCOL
TCP
UDP
Par. 4.5.2(11)
Default GW

xxx.(up to 12 digits
0 to 255)
(Enter default gateway)
SESSION TIMEOUT
off on timeout
always ON
Par. 4.5.2(12)
Figure 4.5 – Defining Communications

Visonic POWERMAX PRO Specifications

General

Wireless Frequency	868 MHz
Communication	PSTN
Siren Output	12V DC, 500mA
Remote Control	Yes
Wireless Range	Up to 200 meters in open space
Operating Temperature	0°C to 49°C
Humidity	85% non-condensing