VISUAL 100 - Safety Warning

VISUAL TECHNOLOGY INCORPORATED, 540 MAIN STREET, TEWKSBURY, MA 01876
SAFETY WARNING
Hazardous voltages 115, 220 VAC and 15 KV DC are present when the
terminal is on, and may remain after power is removed. Use caution when
working on internal circuits, and do not work alone.
When handling the cathode ray tube caution is required as the internal
phosphor is toxic. Safety goggles and gloves must be used whenever the
CRT tube is handled. Should the tube break, skin or eyes exposed to the
phosphor, rinse the affected area with cold water and consult a physician.
This terminal is supplied with a cord set that includes a safety ground.
Do not use this terminal with an ungrounded outlet, missing ground pin,
or use any adaptor which will defeat the safety ground.
Insure that power is turned off before connecting or disconnecting the
keyboard cable.
PREFACE
This manual describes the features and operation of the VISUAL 100
display terminal. Programming and application information together with
first level service information is also included. For second level mainte-
nance information, please consult the VISUAL 100 Maintenance Manual.
This manual is published and distributed by Visual Technology Inc. and
is intended for reference only. The contents and specifications may
change after the date of printing. This manual may not be reproduced
without the written consent of Visual Technology, Inc.