VISUAL 100 - Report Commands and Responses

VISUAL TECHNOLOGY INCORPORATED, 540 MAIN STREET, TEWKSBURY, MA 01876
GO G1 Character Set
ESC (A
ESC) Ac
U.K.
ESC (B
ESC) B
U.S.
ESC
(0
ESC) 0 Graphics
!;SC (1 ESC) 1 Special Not used in
standard
ESC (2
ESC) 2
Special Terminal.
NOTE
The Graphic set is shown in Table 5-2. The U.S./U.K. sets are described in
Section 3.2.2.13.
5.3.2.10 Report Commands and Responses
The following is a list of host generated commands, and possible terminal responses:
Host Command Sequence
1. What are you?
2. What is Cursor
Position?
ESC [c
or
ESCZ
ESC [ 6 n
3. ls terminal 0.K.? ESC [ 5 n
4. What are terminal ESC [ 1 x
parameters?
or
ESC [Ox
Terminal Response(s)
VT100 with Advanced Video
Option
VT100 with Advanced Video
and Printer Options
Cursor is positioned on line
specified by PL, and column
specified by PC. (default is O)
The line number is dependent
on Origin mode.
Terminal is 0.K.
Terminal is not O.K.
f default value is O)
Terminal will report terminal
parameters per the selective
parameters in Table 5-7 only
when requested.
Terminal may send
unsolicited reports and
will report terminal param-
eters per selective parameters
is Table 5-7. (The terminal
will never send unsolicited
reports.)
38
Sequence
ESC [ ?1; 2 c
ESC [ ?1; 3 c
ESC [PL; PC R
ESC [ 0 n
ESC [ 3 n
ESC [ s; p; n; x;
r; c; fx