VISUAL 100 - Page 61

VISUAL TECHNOLOGY INCORPORATED, 540 MAIN STREET, TEWKSBURY, MA 01876
TABLE 6-2
SUMMARY OF PRINT COMMANDS AND MODES (Cont.)
Remote
Function
From Keyboard VT-52 Mode ANSI Mode
Action
Enter Copy Echoed
Copy mode not ESC [? 7 i Received data displayed
Mode Sequence or available in
on screen and sent to
change in VT-52 mode.
printer simultaneously.
SET-UPP XO FF code sent to host
in response to printer
busy. XON code sent to
host in response to
printer not busy.
Exit Copy Echoed
N.A. ESC [? 6 i
Terminal exits Copy
Mode Sequence or
mode and automatically
change in
appends the CAN or DEL
SET-UPP
code as the CANCEL
SELECT feature dictates.
If the PRINTER TYPE
feature is ON, no code
will be appended.
Enter Printer Echoed
ESCW ESC [ 5 i Data sent from host
Controller Sequence or
passed through terminal
Mode change in to printer. XOFF code
SET-UPP
sent to host in response
to printer busy. XON
code sent to host in
response to printer not
busy.
Exit Printer Echoed ESC X ESC [ 4 i Terminal exits printer
Controller Sequence or Controller mode, and
Mode change in
automatically appends
SET-UPP
the CAN or DEL code as
the CANCEL SELECT
feature dictates. If the
PRINTER TYPE feature
is ON, no code will be
appended.
Enter Auto CONTROL ESC A ESC [? 5 i On receipt of LF code
Print Mode with ENTER XOFF code sent to host.
or change in
Contents of line trans-
SET-UPP mitted to printer with
CR/LF or only CR after-
line. XON code sent to
host after .line is trans-
mitted.
Exit Auto
Control with
ESC-
ESC [? 4 i
Terminal exits Auto
Print Mode P or change in
Print mode.
SET-UPP.
53