Vitec Multimedia MGW Ace - The Event Log Page

MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 58
To set SAP:
Parameter
Description
Use default SAP
address and port
Use the default Session Announcement Protocol multicast group and port
as per RFC 2974.
IP Address
Set the target multicast IP address to which SAP messages will be sent.
Port
Set the target port to which SAP messages will be sent.
Announcement
Interval (sec)
Set the interval between SAP messages.
Figure 4-17: The SAP screen
NOTE:
You must click Apply for the new settings to be saved.