Vitec Multimedia MGW Ace - Page 90

MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 87
To configure SAP using an SSH client:
1. In the System window, type "4" for the SAP option. The following window appears:
Figure 7-6: The System window - SAP window
2. Enter the IP Address, Port (number), Announcement Interval and TTL values.
To configure the appliance's host name for the first time using an SSH client:
1. From the main menu screen, type "2" for the Security" option. The following window
appears:
Figure 7-7: The Security window
2. Type "2" for the Change hostname option and type the new host name.