Vitec Multimedia MGW Diamond - Page 10

MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 9
LED/ Port
LED Status
Description
Power LED
• Off
• Green
• Blinking green (once per second)
• Blinking green (twice per second)
• The appliance is off
• The appliance is up and ready
• The appliance is starting
• The appliance is being upgraded.
Stream LED
• Off
• Green
• No stream
• Streaming
Video In LED
• Off
• Green
• No video input
• Video input is detected on one or
more interfaces.
Error LED
• Off
• Blinking red (once per second)
• All services are up and running
• An error has been detected.
USB Port
USB connection for retrieving network
parameters.
Reset
A short press will restart the appliance.
A long press (6 seconds) will return the
unit to factory settings (erasing all user-
stored channel and network settings).
Pressing for 2-3 seconds while powering
the appliance will re-load the last known
good firmware.