Vitec Multimedia MGW Diamond - Page 22

MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 22
Parameter
Display
Description
CH
1-H.264…4S-H.264
Displays the channel number and the compression format
Source
3G/HD/SD-SDI or
Composite
Displays the source type assigned to the channel.
Total Bit-
Rate
Bit-rate in Mbps
Display the total bit-rate of the channel (Video+Audio+KLV
Metadata+streaming protocol overhead). This value doesn’t
include additional overhead required when using ProMPEG
Forward Error Correction or Zixi™ protection.
Audio
Indicates if audio is being inserted into the stream.
Status
• Playing
• Stopped
• Error
• Stopped – Orange. The settings for this channel are
configured, but the channel has not been activated by
the user.
• Playing – Green. The channel is being streamed
without any known errors.
• Error – Red. The channel has encountered an error.
Control
Play/Stop
Play/Stop - allows to start or stop a channel.
Displays the channel status, allow you to change it, as well
as preview the channel and view its related events.
Channel
Name
Displays the channel name as set by the user.
Target
• Multicast or
• Unicast IP
Displays the target IP address.
KLV
Indicates if KLV metadata is being inserted into the stream
(enabled or disabled).
FEC
• Zixi
• Pro-MPEG
Displays the selected error correction technology. Applicable
only when either Zixi™ or Pro-MPEG are selected. Will be
left blank when other streaming protocols are used.