Vitec Multimedia MGW Diamond - Page 52

MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 52
To set SAP:
Parameter
Description
Use default SAP
address
Use the default Session Announcement Protocol multicast group and
port as per RFC 2974.
IP Address
Set the target multicast IP address to which SAP messages will be sent.
Port
Set the target port to which SAP messages will be sent.
Announcement
Interval (sec)
Set the interval between SAP messages.
Figure 4-13: The System SAP tab window
NOTE:
You must click Apply for the new settings to be saved.