Vitec Multimedia MGW Diamond - Page 54

MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 54
To activate a configuration:
1. Select the desired configuration row.
2. Click Activate to activate the configuration. The activated configuration is applied.
To delete a configuration:
1. Select the desired configuration row.
2. Click Delete to delete the configuration.
To activate Auto Start:
1. Select the desired configuration row.
2. Click the desired configuration row under the Load at Startup column. The icon
appears in the Load at Startup column in the relevant configuration row.
On next reboot, the selected configuration will load automatically.
NOTE:
The video sources must be the same ones used when the configuration was created for auto-start configuration
successful load.