Vivitar DVR-310 - Choosing the OSD (On-Screen Display) Language; Setting the Date and Time

19
Setting the date and time
The date/time setting screen will automatically appear:
When first turning the camera on;
When turning the power on after leaving the camera without the batteries for an extended period of time.
To adjust the date and time:
1. Select the year, month, day and time fields with the / buttons.
2. Press the button after all fields are set.
To increase a value, toggle the zoom lever to the / T direction.
To decrease a value, toggle the zoom lever to the / W direction.
The time is displayed in 24-hours format.
Choosing the OSD (On-Screen Display) language
You may select an OSD language for menus and messages displayed on the LCD monitor. Select an OSD language
with the zoom lever and press the button. The setting will be stored. Refer to section in this manual titled
“Language” in the [Setup] menu for further details.
Note:
The OSD language setting screen appears and prompts you to choose a language for displayed information on the LCD
monitor only when you turn on the DVR-310 for the first time.