Vivitar DVR-310 - RECORDING MODES; Recording Video Clips

23
Recording video clips
1. Turn on the power by pressing and holding the button.
2. Compose your scene using the LCD display.
3. Press the button.
Recording will start.
Press the button again to will pause the recording. Pressing the button during pause will resume recording.
4. Press the button to stop recording.
Macro focus
Select this when you want to take a close-up shots.
1. Turn on the power by pressing and holding the button.
2. Slide the focus switch to the position.
3. Compose the shot.
4. Press the button to capture a still image.
To record video clips, press the button to start recording, and then
press the button to stop recording.
Note:
After a macro shot is captured DO NOT FORGET to reset the lens to the normal position.
Flash mode is automatically set to off whenever you switch to Macro mode.