5
Notes on Battery Usage
Do not use batteries other than those specified for use with your DVR-310. Use of unsuitable batteries may
result in the batteries splitting, or leaking and may cause a fire, injury, or soiling of the battery compartment.
When placing the batteries into the DVR-310, check the polarity markings on the batteries ( - and + ) to ensure
that the batteries are inserted correctly. Incorrect battery polarity will result in DVR-310 inoperability and may
result in the batteries splitting or leaking and causing a fire, injury, or soiling of the battery compartment.
Remove the batteries if the DVR-310 will not be used for an extended period of time. The batteries may leak and
cause a fire, injury or soiling of the battery compartment. If the batteries leak, clean and wipe the battery
compartment carefully and install new batteries. Wash your hands carefully if you touch the battery fluid.
When using batteries, carefully read and strictly observe the Safety Instructions and the notes described
below:
Ni-MH rechargeable batteries are highly recommended. To maximize performance and lifetime, we recommend
that you fully charge the batteries and discharge them for at least one complete cycle before use.
Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and
reduce digital video camera performance. Low temperature will adversely affect alkaline battery performance.
Using new rechargeable batteries or rechargeable batteries that have not been used for an extended period of
time will affect the number of images that can be captured.
If you will not be using the batteries for an extended period of time, remove them from the camera to prevent
leakage or corrosion.
Never use batteries of different types (together) or mix old and new batteries. Never use manganese batteries.
More information about batteries is provided in this manual in subsequent sections.
To Next Page
Loading...
