Vivitek D8800 - To Install Batteries in the Remote Control; Range of Effective Remote Control Signal Reception

13
DLP Projector - User’s Manual
To install batteries in the remote control
STEP 1 STEP 2 STEP 3
1. Slide the battery compartment cover in the direction of the arrow to remove it.
2. Install two AA batteries with the correct polarity.
3. Replace the cover.
Notes on Batteries
y Make sure that the battery polarities are correct when installing the batteries.
y Do not mix an old battery with a new one or different types of batteries.
y If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.
Range of effective remote control signal reception
30°
IR Reception eective Angles: 30°
IR Reception eective distance: 10m
10m
Note:
Avoid placing the remote control at places of high temperature or humidity as it could cause the remote control to malfunction.