Vivitek D8800 - Start Using the Projector - Operation; Selecting an Input Source; Selecting an Aspect Ratio; Using the OSD

25
DLP Projector - User’s Manual
Start using the projector - Operation
Selecting An Input Source
When you turn on the D8800/D8900/D8010W, it switches to the last selected input and looks for
a valid signal. Press INPUT on the remote control to select an input source directly.
INPUT
Selecting an Aspect Ratio
Press ASPECT to adjust the video aspect ratio.
ASPECT
2
Using the OSD
1. Press the MENU button on the remote control or machine top cover’s keypad to display the OSD main menu.
2. Press  or  to select a sub-menu.
3. Press  or  to select a sub-menu item.
4. For each sub-menu item, the currently-selected value is highlighted. Press  or  to choose a setting for that
item, and press ENTER on the remote controller or SELECT on the keypad to adjust the value of that item.
5. If want return to the previous menu, please press MENU.
6. In the Main Menu, press MENU to turn off the OSD menu. The D8800/D8900/D8010W OSD menus are arranged.