Vivitek D8800 - Page 3

Start using the projector - Operation 25
y Selecting An Input Source 25
y Selecting an Aspect Ratio 25
y Using the OSD 25
Start using the projector - OSD Introduction 26
y OSD Menu Tree 26
y OSD Introduction - INPUT 28
y OSD Introduction - PICTURE 31
y OSD Introduction - LAMPS 34
y OSD Introduction - ALIGNMENT 35
y OSD Introduction - CONTROL 39
y OSD Introduction - SERVICE 45
Change Lamp 47
y To replace the projector lamp1 47
y To replace the projector lamp2 48
Change Lens 49
y To replace the projector Lens 49
Change Filter 51
y To replace the Filter on the left side of the projector 51
y To replace the Filter on the right side of the projector 52
LED Status 53
y Power LED 53
y Status LED 53
y Lamp1/Lamp2 LED 53
y Temp LED 53
y Shutter LED 53
SPECIFICATIONS 54
SERIAL INTERFACE SPECIFICATIONS 55
y Transfer Specifications 55
y RS-232 Commands 55
y IR Codes and Key names 55
y Operations Commands 56
Dimensions 62
Supported Timings 63
Projection Distance and Screen Size 64
y D8800 64
y D8900 67
y D8010W 70