Chapter 5 APPLICATION
Mount Information
1
2
This displays information on the number of the teeth on the wheel gear, gear reduction ratio.
In “System Menu”, choose “Mount Information” with the or direction key and press the key (or the key).
The “Mount Information” screen appears.
The following are indicated at “Mount Information” if the STAR BOOK TEN is not connected to the mount and used independently.
11 22
X = -180 x 4 (Number of the RA wheel gear teeth x Reduction ratio)
Y = 180 x 4 (Number of the Declination wheel gear teeth x Reduction ratio)
Mount Type: SXD2
100
To Next Page
Loading...