Vixen SXD2 - Expansion Function

Chapter 5 APPLICATION
言語/Language
In “System Menu”, choose “Language” with the or direction key and press the key
(or the key) to call up the dialog box. Refer to the Chapter 2 “Initial Setting”.
Initialize Memory Data
In System Menu, choose “Initialize Memory Data” with the or direction key and press
the key (or the key) to call up the dialog box. Refer to page 73.
Expansion Function
This function becomes available when an expansion module is installed. The Advance Unit is an expansion module available for the STAR
BOOK TEN as of November 2012. For details, read the instruction manuals for the Advance unit.
About StarBook TEN
This allows you to access the program version, IP address and MAC address of your STAR
BOOK TEN controller. This information is required for program updates and downloads from
a PC through a local area network.
In “System Menu”, choose “About StarBook TEN” with the or direction key and press
the key (or the key) to display firmware version, IP address and MAC address of
your STAR BOOK TEN. Refer to page 74.
In the “Initial Configuration” menu, choose “About LAN” with the or direction keys and
press the key (or the key) to display the information screen of “About LAN”. Refer
to page 74.
About LAN
You can confirm “IP address” and “MAC address” on the “Initial Configuration” screen and “System Menu”
Access from the “Initial Configuration” menu
99