Turn the key to" "position, and the gauge is started for self-check:
The display lights up for self-check and shows the current vehicle status.
Engine fault alarm lamp" "ABS fault alarm lamp" "and Oil pressure alarm lamp" "light up.
Left turn light" "
When the left brake's steering switch is pushed to the left, the indicator" "，lights up.
Neutral position indicator light" N "
The engine is in neutral position, and the "N" indicator light is on.
Engine fault alarm light" "
When the engine management system of the vehicle fails, the alarm light " "lights up. When the
ignition key is turned to the" "position, the indicator " "lights up; The indicator light" "goes
out immediately after the engine starts.
!
Warning
Do not wash the gauge directly with high pressure water. Please do not use gasoline, alcohol
and other organic solvents to wipe the gauge, otherwise it will cause cracks or discoloration.
!
Notice
9
When the turning light is damaged or doesn’t work due to other reasons, the flashing frequency
of the indicator " " will be faster than usual, warning to check the failure of the turning light.
To Next Page
Loading...
