T inappropriate size ires play a significant role in connecting motorcycles and the ground. Disordered condition and
of tire will greatly degrade the performance of motorcycles.
Tire pressure
A· bnormal tire pressure will reduce the service life of
tires. L ow tire pressure will cause poor performance in
turning and aggressive wear of tire.
· Excessive tire pressure will reduce the contact area
between tire and the ground, making it slippery and out
of control. A t high speed, the valve of the tire is inclined
to open due to centrifugal force. To avoid sudden air
leakage, a rubber cover with metal lining is installed in
the valve core by threaded connection.
·Tire inflation pressure is proportional to tire temperature.
Tire pressure can be adjusted in the cold state only when the
tire is basically consistent with the ambient in temperature.
Inspection of tire wear limit
· Tires have wear marks on the main tread.
· he tire is prohibited to use when the pattern wears to the mark.T
· There is a wear mark near the TWI mark on the tire edge, which is
located in the drain groove of the tire crown and is in the shape of a
convex hull. Replace the tire immediately when the convex hull is worn.
· Excessive wear of tires can puncture the tires and make the vehicle
out of control.
When the motorcycle tire pattern is worn to the minimum allowable depth,
its operability and grip will be greatly weakened.
Check the tire pressure according to the table below
at normal temperature.
Single Riding
220KPa
220KPa
Double Riding
250KPa
250KPa
Front wheel
Rear wheel
Abnormal tire pressure will affect the handling
performance of motorcycles and may lead to accidents.
Overload can cause tire failure and make motorcycle
out of control. Check the tire pressure at least once a
month.
!
Danger
Maintenance of Tire
61
To Next Page
Loading...
