As an important medium for transmitting braking force in hydraulic braking system, brake fluid is
required to be of quality-assured performance both in HIGH and LOW temperature and well fluidity in
low temperature as well as anti-corrosion. Please fill the proper brake fluid.
nspection of brake fluidI
· Air will enter the brake system if the fluid level in the brake-engine oil cup is too low. Braking
efficiency will be significantly reduced. Check the brake fluid level regularly.
· Check the level of and replenish brake fluid at the front or rear brake fluid cups.
· The liquid should always keep in between the maximum (MAX) and minimum (MIN) level.
· rake fluid is corrosive to a certain extent, which will corrode the paint or plastic surface.B
Maintenance of Brake Fluid
Gas and moisture may enter when opening the brake fluid
cup without authorization, which will greatly reduce or fail
the braking performance. Please go to agencies authorized
by VOGE to replenish or replace it.
Model of brake fluid
Do not mix fluid of different
types or brands. Efficiency of
brake fluid will be decreased
due to inconsistent ormulation.f
· hen polluted by moisture or impurities, brake fluid should be W
replaced or filtered in time, b afor raking performance will be fected
due to ufficient dynamic pressure. This is especially important in ins
humid areas.
· Brake fluid is easy to deteriorate due to long service time, over 2
years, and should be replaced in time.
Model: DOT4 Please handle the replaced brake fluid environmentally.
!
Warning
!
Notice
58
To Next Page
Loading...
