Brake Pad
Braking efficiency will be decreased and brake system may be damaged when brake pad wear exceeds
the allowable minimum thickness. The wear of the brake pad is prohibited to exceed the allowable
minimum thickness to ensure the reliability of the braking system.
Wear limit of rear brake pad:
Replacement
he correct way to replace friction T
plates requires the removal of the front
and rear wheels. Please go to dealers
authorized by VOGE to handle such
work.
·The whole pair should be replaced no
matter the front or rear pad. The brake
imbalance will cause accidents if only
one is replaced. After removing the
pad, please avoid to operate the brake
handle or pedal, otherwise brake
piston reset will be difficult and the
risk of brake fluid leakage will appear.
·Prevent the friction plate and brake
disc from oil or other dirt when
replacing, otherwise brake efficiency
will be reduced.
Please repeatedly confirm the brake handle and pedal
to confirm whether the friction plates effectively
compress the brake disc after replacing.
At the same time, confirm the correctness of free stroke
of the brake handle and pedal.
!
Danger
Wear limit of front brake pad:
65
To Next Page
Loading...
