Adjustment of rear shock absorber
Adjusting the loading of the rear shock absorber is to adapt
different drivers, loads, driving ways and road condition.
·A flexible spring
–Looking downward, the spring will become soft as the
regulator1 spins anticlockwise.
–Hard as the regulator1 spins clockwise.
The dealers authorized by VOGE will prepare specialized tools
for the rear shock absorber adjustment.
·Arbitrarily adjust the loading of rear shock absorber will
reduce you controllability to the vehicle.
·Go to dealers authorized by VOGE for help if necessary.
Adjustment of the height of
headlamp
·The headlight should keep proper height for the shock
absorber to adapt different loading.
·To ensure the safety of night-driving , it is required to adjust the beam angle of the headlight to meet the loading 's
requirement to the vehicle light height.
–The back of the headlight is the position to adjustment bolt, and adjust the bolt with the cross screwdriver
according to the light adjustment map.
–Rotate high light clockwise to turn down the
light and vice versa.
–Rotate low light clockwise to turn up the light
and vice versa.
Please call the dealer to ensure the real
height of the light.
High light adjustment
1
!
Notice
!
Danger
!
Danger
33
Low light adjustment
light adjustment map
To Next Page
Loading...
