·The secondary fuel filter is for filtering the impurity in fuel to prevent them get into fuel injector.
·The machining for fuel injector is very accurate, which easily get blocked up, then it may lead to
injection and engine starting failure.
Please replace the secondary fuel filter on time.
–Remove the fuel tank first, which could be seen at the right side.
-Remove the clamp for fixing the secondary fuel filter by screwdriver.
-Wrap the both ends of secondary fuel filter by cotton cloth to avoid fuel splashing when you
removing the clamp on both sides, because inside of the
fuel tube the residual fuel is still with pressure, which may
splash out.
-Remove the clamp on both sides of secondary fuel filter.
-Replace for new secondary fuel filter.
-The re-assembly is completely opposite to disassembly.
·When the secondary fuel filter removed, absorb the
splashing fuel by cotton cloth.
Replace the fuel filter
Replace the secondary fuel filter each 5000km.
Dispose the replaced fuel filter in environmental friendly way.
!
Notice
Clamp
66
To Next Page
Loading...
