On board tools
The tools are placed in the tool box under the cushion. Open the cushion lock and remove it to see the
tool box.
It should be lubricated after using in the harsh condition or the rainy day or the vehicle washing.
In order to drive safely, it is necessary to maintain good lubrication of working parts for prolonging
service life.
Daily inspection and lubrication parts are as follows:
–clutch handle shaft.
–brake handle
–brake pedal bearing.
–side stand shaft and
side stand spring hook.
–main and auxiliary foot rest shaft and return spring.
–drive chain.
Inspection and maintenance
Except that the transmission chain is required to be lubricated
with chain oil, other lubrication points recommend to apply
lithium grease.
!
Notice
Battery maintenance
The battery of this model is maintenance free colloidal battery. It is not necessary to check the
position and proportion of electrolyte regularly during the service life, but the charging condition
should be checked regularly.
If conditions permit, the battery should be charged for 30 minutes before the first use,
which can effectively extend the service life of the battery.
!
Notice
46
To Next Page
Loading...
