1.If the ground is uneven or not hard, the vehicle cannot park steadily. Please park it on the solid
and flat road.
2. If vehicle has to be parked on a slope, keep the front facing uphill and the engine in gear 1,
which will avoid reversing due to side stand rotation as possible.
3.The vehicle weight is largely considered in designing side stand. Please do not lean on the
motorcycle after parking, otherwise the side stand will be deformed due to the maximum
bearing capacity.
1.When the side stand is working, the engine can only start in neutral; The engine
cannot start as long as the engine is in gear (i.e. not in neutral position).
2.When the side stand is fully retracted and the clutch is gripped, the engine can start
in any gear; The engine immediately switches off once putting down the side stand
when engine is working.
!
Warning
!
Notice
28
To Next Page
Loading...
