76
9.6 Standby and low standby limits
You can set two different limits for the standby power consump-
tion. For some units, the normal standby power consumption
drops to an even lower value after a certain time.
Proceed to the next step if you have set the electricity tariff
(see chapter 9.5) before setting the standby limits.
Or access the setup mode (see chapter 9.2). Pressing the
button three times takes you to the standby limit setup
menu (see next step).
Briey press the button; STANDBY POWER LEVEL
ashes at the top of the display.
Use the button or to toggle between the standby limit
(STANDBY POWER LEVEL) and the low standby limit (LOW
STANDBY POWER LEVEL = symbol ).
Briey press the button; the power consumption limit
begins to ash.
To Next Page
Loading...
Need help?
General
