83
9.10 LED ring and backlight
Colour
Blue lightning no date conguration and time setting
Greenish low power consumption
Yellow-orange medium power consumption
Red Overload
Off Night mode is enabled
In the event of inactivity after the set time with the night mode
enabled, the backlight and the LED ring are switched off.
With the night mode switched off, the LED ring and the backlight
are always switched on.
The red light will continue ashing if the load power is not lower
than the limit, in order to let the user know it has been overloaded.
Press any button to stop the alarm and take off the load to resume
to current status.
To Next Page
Loading...
Need help?
General
